README.hpux - Perl version 5 on Hewlett-Packard Unix (HP-UX) systems
This document describes various features of HP's Unix operating system (HP-UX) that will affect how Perl version 5 (hereafter just Perl) is compiled and/or runs.
When compiling Perl, the use of an ANSI C compiler is highly recommended. The C compiler that ships with all HP-UX systems is a K&R compiler that should only be used to build new kernels.
Perl can be compiled with either HP's ANSI C compiler or with gcc. The former is recommended, as not only can it compile Perl with no difficulty, but also can take advantage of features listed later that require the use of HP compiler-specific command-line flags.
If you decide to use gcc, make sure your installation is recent and complete, and be sure to read the Perl README file for more gcc-specific details.
HP's current Unix systems run on its own Precision Architecture (PA-RISC) chip. HP-UX used to run on the Motorola MC68000 family of chips, but any machine with this chip in it is quite obsolete and this document will not attempt to address issues for compiling Perl on the Motorola chipset.
The most recent version of PA-RISC at the time of this document's last update is 2.0.
The original version of PA-RISC, HP no longer sells any system with this chip.
The following systems contain PA-RISC 1.0 chips:
600, 635, 645, 800, 808, 815, 822, 825, 832, 834, 835, 840, 842, 845, 850, 852, 855, 860, 865, 870, 890
An upgrade to the PA-RISC design, it shipped for many years in many different system.
The following systems contain with PA-RISC 1.1 chips:
705, 710, 712, 715, 720, 722, 725, 728, 730, 735, 743, 745, 747, 750, 755, 770, 807S, 817S, 827S, 837S, 847S, 857S, 867S, 877S, 887S, 897S, D200, D210, D220, D230, D250, D260, D310, D320, D330, D350, D360, D400, E25, E35, E45, E55, F10, F20, F30, G30, G40, G50, G60, G70, H30, H40, H50, H60, H70, I30, I40, I50, I60, I70, K100, K200, K210, K220, K400, K410, K420, T500, T520
The most recent upgrade to the PA-RISC design, it added support for 64-bit integer data.
The following systems contain PA-RISC 2.0 chips (this is very likely to be out of date):
D270, D280, D370, D380, K250, K260, K370, K380, K450, K460, K570, K580, T600, V2200
A complete list of models at the time the OS was built is in the file /opt/langtools/lib/sched.models. The first column corresponds to the output of the ``uname -m'' command (without the leading ``9000/''). The second column is the PA-RISC version and the third column is the exact chip type used.
An executable compiled on a PA-RISC 2.0 platform will not execute on a PA-RISC 1.1 platform, even if they are running the same version of HP-UX. If you are building Perl on a PA-RISC 2.0 platform and want that Perl to to also run on a PA-RISC 1.1, the compiler flags +DAportable and +DS32 should be used.
It is no longer possible to compile PA-RISC 1.0 executables on either the PA-RISC 1.1 or 2.0 platforms.
HP-UX supports dynamically loadable libraries (shared libraries). Shared libraries end with the suffix .sl.
Shared libraries created on a platform using a particular PA-RISC version are not usable on platforms using an earlier PA-RISC version by default. However, this backwards compatibility may be enabled using the same +DAportable compiler flag (with the same PA-RISC 1.0 caveat mentioned above).
To create a shared library, the following steps must be performed:
1. Compile source modules with +z or +Z flag to create a .o module which contains Position-Independent Code (PIC). The linker will tell you in the next step if +Z was needed.
2. Link the shared library using the -b flag. If the code calls any functions in other system libraries (e.g., libm), it must be included on this line.
(Note that these steps are usually handled automatically by the extension's Makefile).
If these dependent libraries are not listed at shared library creation time, you will get fatal ``Unresolved symbol'' errors at run time when the library is loaded.
You may create a shared library that referers to another library, which may be either an archive library or a shared library. If it is a shared library, this is called a ``dependent library''. The dependent library's name is recorded in the main shared library, but it is not linked into the shared library. Instead, it is loaded when the main shared library is loaded.
If the referred library is an archive library, then it is treated as a simple collection of .o modules (all of which must contain PIC). These modules are then linked into the shared library.
Note that it is okay to create a library which contains a dependent library that is already linked into perl.
It is no longer possible to link PA-RISC 1.0 shared libraries.
When using this compiler to build Perl, you should make sure that the flag -Aa is added to the cpprun and cppstdin variables in the config.sh file.
Beginning with HP-UX version 10.20, files larger than 2GB (2^31) may be created and manipulated. Three separate methods of doing this are available. Of these methods, the best method for Perl is to compile using the -D_FILE_OFFSET_BITS=64 compiler flag. This causes Perl to be compiled using structures and functions in which these are 64 bits wide, rather than 32 bits wide.
There are only two drawbacks to this approach: the first is that the seek and tell functions (both the builtin version and the POSIX module's version) will not correctly function for these large files (the offset arguments in seek and tell are implemented as type long). The second is that any extension which calls any file-manipulating C function will need to be recompiled using the above-mentioned -D_FILE_OFFSET_BITS=64 flag. The list of functions that will need to recompiled is: creat, fgetpos, fopen, freopen, fsetpos, fstat, fstatvfs, fstatvfsdev, ftruncate, ftw, lockf, lseek, lstat, mmap, nftw, open, prealloc, stat, statvfs, statvfsdev, tmpfile, truncate, getrlimit, setrlimit
It is impossible to compile a version of threaded Perl on any version of HP-UX before 10.30, and it is strongly suggested that you be running on HP-UX 11.00 at least.
To compile Perl with thread, add -Dusethreads to the arguments of Configure. Ensure that the -D_POSIX_C_SOURCE=199506L compiler flag is automatically added to the list of flags. Also make sure that -lpthread is listed before -lc in the list of libraries to link Perl with.
As of the date of this document, Perl threads are not fully supported on HP-UX.
Beginning with HP-UX 11.00, programs compiled under HP-UX can take advantage of the LP64 programming environment (LP64 means Longs and Pointers are 64 bits wide).
Work is being performed on Perl to make it 64-bit compliant on all versions of Unix. Once this is complete, scalar variables will be able to hold numbers larger than 2^32 with complete precision.
As of the date of this document, Perl is not 64-bit compliant on HP-UX.
Should a user wish to experiment with compiling Perl in the LP64 environment, the following steps must be taken: libraries must be searched only within /lib/pa20_64, the compiler flag +DD64 must be used, and the C library is now located at /lib/pa20_64/libc.sl.
On the brighter side, the large file problem goes away, as longs are now 64 bits wide.
If you attempt to compile Perl with threads on an 11.X system and also link in the GDBM library, then Perl will immediately core dump when it starts up. The only workaround at this point is to relink the GDBM library under 11.X, then relink it into Perl.
If you are compiling Perl on a remotely-mounted NFS filesystem, the test io/fs.t may fail on test #18. This appears to be a bug in HP-UX and no fix is currently available.
Jeff Okamoto <email@example.com>
With much assistance regarding shared libraries from Marc Sabatella.
Version 0.2: 1999/03/01